







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Anaheim, CA
Custom and geometric windows are made to a specific shape and size rather than pulled from a stock size chart: arches, half-rounds, trapezoids, trapezoid-plus-rectangle combinations, circles, octagons, angled corner units, and full-wall window walls that follow a roofline. Homeowners in Anaheim need them when an existing opening is unusual, when a remodeling plan calls for a shape that ties into a gable or stairwell, or when a mid-century ranch or a newer build in the hills wants glass that reads as architecture instead of a punched hole. We do this work because a geometric unit is unforgiving: the template has to be right the first time, the flashing has to be built for a curve, and the trim has to match on all sides.
Groundwork Construction Co. of Anaheim handles custom and geometric windows as part of our full Windows & Doors line, with a curated set of brand partners that includes Andersen and Marvin for the units themselves and Oldcastle for the masonry and sill components that show up on arched and radius work. Our technicians have up to 12 years of experience, every one of them is background-checked and arrives in uniform, and every project carries the 730-Day Done Right Promise. If you want a straight answer on whether a shape is buildable in your wall, call (888) 300-3178 and a live person picks up, day or night.
Key Takeaways
- Geometric windows cost more than stock rectangles because each unit is templated to your actual opening, not a catalog size.
- Most Anaheim radius and arch jobs are measured, ordered, and installed in roughly three to six weeks depending on the manufacturer’s lead time.
- Anaheim’s inland heat and strong afternoon sun push us toward low-E glass and thermally broken frames on any west- or south-facing geometric unit.
- Our pricing is upfront before we order anything, and projects over $10,000 get $1,000 off, with 0% financing for 18 months available.

When You Need Custom & Geometric Windows
Most homeowners don’t wake up wanting a trapezoid. They get there because of a specific condition in the house. Here are the ones we run into most across Anaheim.
- The opening isn’t a rectangle, and it never was. Gable ends, stair landings, and the triangle under a vaulted ceiling are the classic cases. A stock unit can’t fill that space without a framed-in filler panel, and a filler panel looks like a mistake. A templated geometric unit fills it cleanly.
- You’re matching an original shape during a remodel. Plenty of Anaheim housing stock from the 1950s through the 1970s used arched or angled feature windows at the entry or over a built-in. When one fails, replacing it with a rectangle changes the whole facade. We template the existing opening so the new unit matches the architecture.
- An addition created a new sightline. A home addition or ADU in Anaheim often puts a new roofline against an existing wall. The window that resolves that junction is usually a custom shape, sometimes paired with a rectangular unit below it in the same frame.
- Afternoon heat is cooking a west-facing room. Anaheim runs hot inland from the coast, and a west or southwest wall takes the brunt from early afternoon into evening. A custom unit lets you specify low-E glass and a frame profile built for that exposure rather than settling for whatever the shelf had.
- You want a window wall, not a window. Corner glass, mulled combinations, and floor-to-ceiling units along a patio wall all fall under custom work. These need structural coordination with the header above them, which is a conversation to have before the drywall goes up.
- A previous installer left a bad fit. We get called to arched openings where a stock unit was shimmed and caulked into a curve, and the result leaks or drafts. Fixing that means templating the opening properly and starting over with a made-to-shape unit.
Our Custom & Geometric Windows Process
Custom shape work runs on a different clock than a standard replacement, and the sequence matters more than the speed. Here’s how we move through it.
- Site visit and field measurement. We measure the rough opening at multiple points, check the wall for plumb and square, and look at what’s behind the drywall. On radius and arch openings we build a physical template rather than trusting a single tape measurement, because a curve measured in three spots can still be wrong in the other five.
- Shape, material, and glass selection. We walk through the profile options with you, then glass. For Anaheim’s sun exposure we usually land on low-E with argon, and on frames that hold up to heat cycling without warping. This is also where we confirm whether the unit is fixed, operable, or a combination, and whether it needs mulling to a neighbor unit.
- Upfront pricing before anything is ordered. You get the full number in writing before the manufacturer gets a purchase order. No allowances that quietly grow, no “we’ll see once we open the wall” surprises unless we find something genuinely hidden, and we tell you that up front if there’s a risk.
- Order and lead time. Custom units are built to the template, so lead time runs longer than stock. We give you the real window and keep you updated rather than going quiet. Masonry sills and surrounds using Oldcastle or a comparable product are coordinated to land alongside the units, not after them.
- Installation and flashing. Geometric units fail at the perimeter if the flashing isn’t built for the shape. We install the unit, integrate the flashing and weather barrier correctly at curves and angles, then set the interior and exterior trim to match the profile on every side.
- Final walkthrough and the 730-Day Done Right Promise. We operate every operable unit, check the seal at every edge, and walk the job with you. If something isn’t right in the two years that follow, we come back and make it right. That’s the guarantee, and it’s in writing.

Custom & Geometric Windows Pricing in Anaheim
Custom and geometric windows in Anaheim typically run $950 to $2,800 per unit installed for a single fixed shape, with larger radius units, operable units, and mulled combinations pushing higher. A full arched feature wall with three or more coordinated units commonly lands in the $4,500 to $12,000 range. These are honest ranges, not a bait number; the only way to get an exact figure is a measurement, and the estimate is free.
| Scope | Typical installed range |
|---|---|
| Single fixed geometric unit (half-round, octagon, small arch) | $950 – $1,900 |
| Larger arch or radius unit, standard frame | $1,700 – $2,800 |
| Operable geometric or custom-shaped unit (awning, casement) | $2,200 – $3,600 |
| Trapezoid, angled, or gable-end unit with custom trim | $1,400 – $2,600 |
| Mulled combination or two-unit custom assembly | $3,200 – $6,500 |
| Feature wall, three or more coordinated geometric units | $4,500 – $12,000+ |
| Custom-shaped exterior masonry sill or surround | $400 – $1,400 |
What moves the number most: the shape (a half-round is more forgiving than a true eyebrow arch), the size, whether the unit operates, glass package, frame material, and how much trim and finish work the opening needs. A job where the opening is already framed and flashed correctly is a different job from one where we’re rebuilding the rough opening and integrating a new masonry sill with Quikrete or Sakrete patching mortar. Second-story and hard-to-reach installs add labor and sometimes a lift. And if the opening sits under a damaged header, that’s structural work that has to be resolved before a window goes in.
We give you the number before we order, and it doesn’t move because of a calendar. Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available so a larger custom scope doesn’t have to wait. The free project estimate and design consult is where all of this gets nailed down, and there’s no charge for it.
Why Geometric Windows Need Different Handling Than Stock Replacements
A stock replacement is a swap. A geometric unit is a build. The difference shows up in three places, and all three cost money if they’re skipped.
Templating. A radius opening measured at the spring line, the crown, and the two ends can still be off by half an inch in the arc between them. We build a physical template so the manufacturer cuts to the actual opening. Skipping that step is how you end up with a unit that fits at the edges and gaps in the middle, which then gets caulked and looks it.
Flashing at the curve. Water runs around a radius differently than it runs down a straight head. The flashing has to follow the shape, lap correctly, and integrate with the weather barrier behind it. This is the single most common failure point we get called to fix on arched windows installed by someone else, and in Anaheim’s dry-season-then-rain pattern it can take a couple of seasons before the damage shows up inside.
Trim continuity. On an arch or an angled unit, the interior and exterior trim have to bend or miter to match the shape on all sides. Getting it right means the window looks like it was always there. Getting it wrong means the shape draws the eye for the wrong reason. We finish the trim as part of the job, not as a separate line item you have to chase down later.
That’s the argument for hiring the whole scope to one contractor: the templating, the order, the flashing, the masonry, and the trim all sit with the same team, backed by the 730-Day Done Right Promise. If you also need a roofer to coordinate the flashing tie-in, or a full kitchen or bathroom project running at the same time, we handle those under the same roof as part of our full-scope home construction work. Built to last, backed in writing.
Custom & Geometric Windows We Handle in Anaheim
Geometric is a category, not a single product. The shapes we template and install most often here:
- Half-rounds and full rounds – the classic arched-top feature window, usually over an entry, a stair landing, or a pair of doors.
- Eyebrow arches – a shallower segmental curve that follows a flatter roofline; harder to template than a half-round and less forgiving of a bad measurement.
- Trapezoids and gable-end triangles – the units that fill the triangle under a pitched roof, often mulled to a rectangular window below.
- Octagons and hexagons – usually accent units at an entry or a stairwell, common in mid-century Anaheim homes.
- Angled and corner units – windows set into a corner where two walls meet, or cut at an angle to follow an interior layout.
- Custom window walls and mulled combinations – two or more units joined in a single frame, frequently used along a patio wall or a vaulted living space.
Frame and glass options run from vinyl to wood-clad to fiberglass depending on the exposure and the look you want. On west and south walls in Anaheim we steer toward low-E glass and thermally stable frames, because the sun load on a fixed geometric unit with no ventilation path is real. Windows that don’t open can’t shed heat, so the glass package has to do the work.
Safety and Structural Caveats on Custom Window Work
Some of what we do in a custom window opening is genuinely dangerous to touch, and we tell homeowners that up front. Two specific things:
- Header and structural work. Any opening wider than the original, or any change to an arched or gable wall, involves the header above it. If the framing is compromised or the load path needs reworking, that’s structural work that should only be done by a licensed structural professional, and it has to be resolved before a window goes in. We don’t cut a bigger hole and hope.
- Electrical near an opening. Exterior lighting, outlets under a window, and switches beside one frequently run through the same wall cavity. Any electrical relocation is a job for a licensed electrician, not a window crew. If we find wiring in the way, we stop and coordinate rather than work around it.
Neither of those is an upsell. It’s the difference between a window that lasts and one that fails in the first heavy rain or the first hot week of September.
What to Check Before You Order a Geometric Unit
If you’re comparing bids, here’s what separates a real custom window proposal from a guess. Ask each contractor for these before you sign:
- A physical template or a written measurement sheet from the actual opening, not a single “about” dimension.
- The exact manufacturer and model of the unit, in writing.
- A written flashing plan for the curve or angle, not just “we’ll seal it.”
- The glass specification (low-E, argon, U-value) and the frame material.
- The declared lead time, and whether the quoted price is locked through it.
- The workmanship warranty in writing, with the number of days or years stated.
Our answer to that last item is the 730-Day Done Right Promise: if a unit we installed isn’t right, we come back and make it right, for two full years. That’s one of the longest workmanship guarantees in residential construction, and we put it in writing because we can stand behind it.
FAQs – Custom & Geometric Windows
How much do custom and geometric windows cost in Anaheim?
A single fixed geometric unit in Anaheim typically costs $950 to $2,800 installed, and a full arched feature wall with multiple coordinated units usually runs $4,500 to $12,000. The variables that move the price most are the shape, the size, whether the unit operates, the glass package, and how much trim and masonry surround the opening needs. Call (888) 300-3178 for an exact quote – estimates are free.
How long does it take to get custom windows in Anaheim?
Most custom shape jobs in Anaheim run three to six weeks from order to installation, with larger mulled assemblies and unusual finishes sometimes running longer. The site visit, template, and order steps happen in the first week; the rest is manufacturer lead time plus a single installation day for a typical job. We give you the real window up front rather than a best-case number. Call for the current lead time on the shape you have in mind.
Can you match an existing arched window that’s failing?
Yes. We template the existing opening and have a matched unit made to the same shape, so the facade stays consistent rather than getting a rectangle shimmed into a curve. This is one of the most common reasons we get called for custom work in Anaheim, especially on homes from the 1950s through the 1970s that used arches and angled feature windows at the entry. Call and we’ll set up the measurement.
Can you come out today to measure a geometric opening?
We can usually get a site visit scheduled quickly, and calls are answered by a live person 24 hours a day, so you’ll get an actual answer rather than voicemail. Measurement and templating are done on a scheduled visit, not over the phone, because a curve can’t be measured from a photo. Call (888) 300-3178 and we’ll get you on the calendar – the estimate and design consult are free.
Get a Free Estimate on Custom & Geometric Windows in Anaheim
Custom windows don’t fail because the shape was hard. They fail because someone guessed at the measurement, skipped the template, or caulked around a flashing problem. We don’t do any of those. Groundwork Construction Co. of Anaheim measures, templates, orders, installs, finishes the trim, and stands behind the whole scope for 730 days. Our technicians bring up to 12 years of experience to the job, arrive in uniform and background-checked, and we give you the price before we order. We serve the greater Anaheim service area, and we’re the kind of contractor you hire once and call back for the next project. Call (888) 300-3178 for a free estimate, ask about the $1,000 off on projects over $10,000, and see if 0% financing for 18 months makes the scope workable now instead of later.
Written by the team at Groundwork Construction Co. of Anaheim, serving Anaheim.


