







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Most Cabinet & Countertop projects in Garden Grove run $14,000 – $45,000 for a full kitchen’s worth of new cabinetry and stone, with cabinet-only swaps landing at $4,000 – $13,000 and countertops alone at $2,000 – $6,500. A typical tear-out and install takes two to three weeks of working days once materials are on site. Call (888) 300-3178 for a free on-site measure and a written line-item estimate before you commit to anything.

What Cabinets & Countertops in Garden Grove actually involves
The job is two linked projects that share one deadline. Cabinets have to be ordered, delivered, set, shimmed and leveled before anyone can template a countertop, because stone is cut to the actual cabinet run, not the drawing. That sequencing is why a “quick” kitchen update stalls for weeks when a homeowner buys countertops before the boxes are in. In Garden Grove we build the schedule around it from day one, and we put the full scope, deposit schedule and material lead times in writing so nobody is guessing in week two.
How we run the job, stage by stage

Five stages, each with a decision that belongs to you and a piece of work that belongs to us.
1. Measure, layout and cabinet order (day 1, plus a 3 – 6 week lead time)
We measure every wall, check for out-of-square corners and floor slope (common in 1950s slab homes), and confirm appliance openings. You pick the door style, finish and box construction. Then we place the order. This is the longest wait in the whole project, so it sets the calendar for everything after it.
2. Demo and prep (2 – 3 days)
Old cabinets, countertops, sink and backsplash come out. We inspect what’s behind the wall: water damage at the sink base, old galvanized or polybutylene supply lines, and whether the wall is plumb enough to hang new boxes without shimming the whole run. Any rot or repair gets flagged with a price before we continue, not after.
3. Cabinet set and level (2 – 4 days)
Base and wall cabinets get set, shimmed, screwed to studs and lined up along a laser level. Crown, light rail, fillers and panels go on. You confirm hardware placement and pull-out locations before we drill anything. Doors and drawers stay off until the countertop crew is finished to avoid chips.
4. Template, fabricate and install the countertop (5 – 10 working days)
A fabricator templates the installed cabinets, then cuts the slab. Stone install is usually one day, with the sink cutout, cooktop cutout and edge profile done at the shop. You choose the slab, edge and sink before templating. This is the stage where a delayed slab choice costs the most time.
5. Sink, faucet, final trim and walkthrough (1 – 2 days)
Plumbing gets reconnected, the dishwasher and disposal tied in, toe kick and end panels finished, and caulk lines run. We walk the room with you, check every door and drawer, and hand over the written workmanship warranty. The whole project is covered by our 730-Day Done Right Promise: if something isn’t right, we come back and make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make
Cabinet and countertop decisions drive most of the cost. Here’s what the real trade-offs look like.
- Stock vs. semi-custom cabinets. Stock boxes are cheapest and fastest but come in fixed sizes, so you fill gaps with filler strips. Semi-custom lets you hit the ceiling line and odd wall lengths cleanly. It costs more and adds lead time. KraftMaid is a strong middle path with real door and finish choices.
- Plywood vs. particleboard boxes. Plywood holds screws better and tolerates moisture near the sink. Particleboard is cheaper and fine in dry runs. In a Garden Grove kitchen with a dishwasher and sink on the same run, we lean plywood.
- Quartz vs. granite vs. laminate. Quartz is non-porous, needs no sealing, and handles the heat swings of a Santa Ana week well. Granite is natural and unique but needs periodic sealing. Laminate is the budget option and has improved a lot. Cambria quartz sits at the upper end with a strong warranty.
- Slab thickness and edge. 2cm vs. 3cm slabs, and eased vs. bullnose vs. mitered edges. A mitered edge looks like a thick slab without the weight or the price of one.
- Sink style. Undermount stainless is durable and easy to clean. A farmhouse apron sink needs a special cabinet and changes the countertop cut. Decide before templating, not after.
- Soft-close and pull-outs. Worth the money on the drawers you use daily. Skip them on uppers you open twice a week.
What Cabinets & Countertops costs in Garden Grove, CA
A full cabinet and countertop replacement runs $14,000 – $45,000 in Garden Grove. Breaking it apart helps you see where the money goes.

| Scope | Typical range |
|---|---|
| Cabinet installation (supply + install) | $4,000 – $13,000 |
| Countertop installation (stone) | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full cabinets & countertops package | $14,000 – $45,000 |
Four things push a job toward the high end. Size: a 10-foot galley is not a 14-foot U-shape with an island. Condition behind the wall: old slab plumbing or a failing 100-amp panel means electrical or plumbing work before cabinets go in. Material grade: stock laminate vs. semi-custom with quartz can double the cabinet line. Layout changes: moving the sink or range means new plumbing and electrical rough-in, which adds time and cost.
A written estimate covers cabinet supply, countertop fabrication and install, demo, haul-away, sink and faucet reconnection, and final trim. It usually does not cover new appliances, new flooring under the cabinets, or a panel upgrade unless we’ve quoted it separately. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Garden Grove homes do to this job
Most of Garden Grove’s housing stock is 1950s – 1970s single-story tract homes: 1,100 – 1,600 sq ft, stucco over wood frame or block, slab-on-grade. That matters here. Slab floors are rarely perfectly level, so cabinet runs often need shimming. Original plumbing under the sink is frequently at the end of its life, and undersized 100-amp panels are common. If your kitchen is part of a larger addition or a full Kitchen Remodeling in Garden Grove, we check the panel and the supply lines before the cabinet order goes in. Because the city is built out, nearly every kitchen job falls under Orange County permit and inspection rules, so we pull the permit and meet the inspector rather than hand you the paperwork. It’s also common to see multigenerational households in the 92843 and 92844 ZIPs, where the kitchen doubles as a gathering space and an island earns its cost fast. Homeowners often pair a kitchen refresh with a Garage Conversion ADU in Garden Grove or a New Detached ADU in Garden Grove, and it’s worth planning those together so the panel upgrade serves both projects. If your scope is wider than cabinets and counters, start with our Kitchen Remodeling service and we’ll draft the right plan. We cover all of Garden Grove, including the Beach Blvd. and Brookhurst corridors.
Serving Garden Grove, CA – Our Local Coverage Area
We serve Garden Grove and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Garden Grove

Two to three weeks of working days, not counting cabinet and slab lead times, which can add three to six weeks before work starts. The templating and fabrication window for stone is the single biggest schedule variable. Call (888) 300-3178 and we’ll put a real calendar in front of you.
Straight replacement in the same footprint usually doesn’t need one, but anything that moves plumbing, electrical or a wall does. If the layout changes, we pull the permit and meet the inspector. Call (888) 300-3178 and we’ll tell you which side of that line your job falls on.
Yes, and it’s the most common path we take. Keeping the sink, range and dishwasher where they are avoids rough-in work and keeps the budget predictable. You still get new boxes, new stone and a fresh layout inside the same footprint. Call (888) 300-3178 to walk through your kitchen.
Budget $14,000 – $45,000 for a full kitchen, $4,000 – $13,000 for cabinets alone, and $2,000 – $6,500 for stone countertops. Material grade and what’s behind the wall move the number most. Call (888) 300-3178 for an exact quote. Estimates are free.
Every Cabinet & Countertop project is backed by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If a door sags, a countertop seam fails or a drawer pull loosens, we come back and make it right. Call (888) 300-3178 with any questions.
Get a free Cabinets & Countertops estimate in Garden Grove
We’ll come out, measure your kitchen, look behind the walls where it matters, and hand you a written line-item estimate with no surprises. Calls are answered by a live person 24/7, our technicians are background-checked and arrive in uniform, and every project is backed by the 730-Day Done Right Promise. Call (888) 300-3178 to schedule your free estimate for Cabinets & Countertops in Garden Grove.
Written by the team at Groundwork Construction Co.












