







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Fountain Valley, CA: What They Cost and How Long They Take
Paver driveways in Fountain Valley typically run $7,000 – $18,000 and take three to five working days once the base is ready, depending on square footage, base depth, and paver choice. Most of our Fountain Valley paver driveway projects land in the middle of that range: a two-car apron of roughly 400 – 500 square feet, laid in a Cambridge Pavers or Oldcastle unit over a compacted Class II base. Call (888) 300-3178 for a free on-site estimate with a written line-item quote.

How a Paver Driveway Goes In, Stage by Stage

The sequence matters more than the schedule. Here’s what actually happens, and what you’ll be deciding at each point.
Day 1: Demo and haul-off
We break out the old slab, asphalt, or worn pavers and haul the debris away. On Fountain Valley’s 1960s and 70s single-story stucco tract homes, this is where we find out what’s underneath – old root systems, patched utility trenches, or a slab poured thin. That discovery sometimes adds a day. Homeowner decision: none at this stage, though we’ll show you any surprises before we bury them.
Day 1 – 2: Excavation and base prep
We excavate to depth, then build a compacted aggregate base, typically 4 to 6 inches depending on whether cars or heavier loads will park there. Base prep is the single biggest predictor of whether a driveway stays flat for a decade or settles in two years. Edge restraints get set before any pavers go down – a paver driveway without proper edge restraint is a driveway that will spread.
Day 2 – 3: Setting bed and paver installation
A 1-inch bedding sand layer goes down, then the pavers go in, laid in a running bond, herringbone, or basketweave pattern. This is the homeowner’s main decision window: you’ll pick the pattern, the color blend, and the border style. We lay out a dry sample area before committing the full surface.
Day 3 – 4: Cutting, edge restraint, and compaction
Field cuts around curves and against the garage turnaround get made with a wet saw. Then the surface is compacted and joint sand is worked into the gaps. Quikrete or Sakrete polymeric joint sand is what we typically use here. Compaction is what locks the pavers together.
Day 4 – 5: Final inspection and cleanup
We do a level check, wash the surface, and walk the job with you before we call it done. You’ll get the 730-Day Done Right Promise in writing, and a clean driveway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Be Choosing Between
Paver driveways aren’t a single product. These are the real trades behind the decision:
- Concrete pavers (Cambridge Pavers, Oldcastle) – The standard for driveways in Fountain Valley. Manufactured to consistent dimensions, rated for vehicle load, available in a dozen-plus color families and two or three thicknesses. The 60mm units are the right call for driveways; 80mm for heavier use.
- Clay brick – Warmer look, holds color, higher cost per square foot than manufactured concrete pavers. Good fit when the existing stucco has a warm tone. Cracking risk on heavy vehicle loads is higher than with concrete pavers.
- Permeable paver systems – Worth mentioning because Fountain Valley’s low-lying terrain and high water table make drainage a real design question, not an afterthought. A permeable unit with an open-graded base lets water move through instead of sheeting off. Costs more on the base side; the payoff is fewer puddles at the apron.
- Running bond vs. herringbone – Running bond is simpler and cheaper to lay. Herringbone costs a bit more in labor but resists lateral movement better under turning tires. On a driveway with any curve, herringbone is usually the right answer.
- Border course – A soldier or sailor course around the perimeter is a small line item, often $300 – $800 on a typical apron, and it visually locks the whole surface together.
Concrete and asphalt are covered on their own dedicated pages, along with Driveway & Pavers in Fountain Valley as the wider project scope. If the job is part of a full driveway and hardscape plan, that’s where to start.
What Paver Driveways Cost in Fountain Valley, CA
The honest number for a standard two-car paver driveway in Fountain Valley is $7,000 – $18,000. Higher-end builds with permeable systems, complex patterns, or extensive base work top the range.

- Square footage – The single biggest driver. A single-car apron and a three-car turnaround are wildly different jobs.
- Existing condition – Breaking out a 50-year-old slab costs more than pulling up old pavers. Hidden subgrade issues add to it.
- Base depth – 4 inches vs. 6 inches of compacted aggregate is a real dollar difference, and the right call depends on driveway traffic.
- Paver grade and pattern – Standard concrete pavers in running bond sit at the low end; premium clay brick in herringbone at the high end.
- Drainage work – Permeable systems, French drains, or revised grading around a low-lying lot add cost but solve a real problem on Fountain Valley’s flat terrain.
Your written estimate should list every line item: demolition, haul-off, base material, paver product, edge restraint, joint sand, labor, and disposal. What typically isn’t included: permit fees (if any are required), HOA design review costs, driveway sealing down the road, and any subgrade repair for damage found after demo. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Fountain Valley Homes Specifically Do to This Job
Fountain Valley built out almost entirely during the 1960s and 70s suburban boom, and the housing stock in the 92708 ZIP reflects that. Single-story stucco tract homes, slab-on-grade, with original driveways that have now seen 50-plus years of sun and traffic. There is essentially no undeveloped land left, so every paver driveway here is a replacement, not a new build. That changes the work: we’re almost always demobilizing something, not starting from clean dirt.
Two local conditions shape the job. First, the flat terrain and high water table mean base drainage has to be designed, not assumed. On a low-lying lot near the Mile Square area, a base that holds water will undermine pavers within a few seasons. Second, the older wood-frame homes are prone to dry rot and termite damage at the fascia and sill plate – not a paver problem, but something we flag when we see it during demolition. The intense dry-summer sun and dry Santa Ana wind events crack stucco and degrade exterior sealants faster than most of coastal Orange County, so driveway edges against the stucco wall are worth checking each fall.
Leisure World and the surrounding Mile Square-area tracts sit under HOA design review, which means paver color and pattern choices may need written approval before we lay a single unit. We cover Fountain Valley’s 92708 and 92728 ZIP codes and surrounding areas including Santa Ana, Garden Grove, Stanton, and Tustin.
Serving Fountain Valley, CA – Our Local Coverage Area
We serve Fountain Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Fountain Valley

Most paver driveways take three to five working days from demo to final inspection, depending on square footage and base prep. Larger driveways or ones needing significant subgrade work can extend to a week. Homeowners often pair the project with Door Installation in Fountain Valley while the driveway is torn up, since the garage turnaround is already accessible.
Permit requirements depend on the scope – specifically whether the base grade changes, drainage is altered, or the driveway connects to the public right-of-way. A straight replacement usually doesn’t require one; a grading change or new apron often does. We pull the required permits and pass inspections. Call (888) 300-3178 and we’ll tell you exactly what applies to your address.
Yes. Concrete pavers from Cambridge Pavers and Oldcastle are UV-stable and hold color far longer than asphalt, which fades and oxidizes within a few years. The one maintenance hedge: plan on re-sanding joints every two to three years, especially on the sunny west-facing apron where the Santa Ana winds strip sand faster.
Plan on roughly $14 – $32 per square foot installed for a standard paver driveway, with the exact range set by base depth, paver grade, pattern, and drainage work. That pricing is for the driveway only – a paver patio or walkway is a separate Driveway & Pavers scope. Call (888) 300-3178 for an exact line-item quote on your square footage; estimates are free.
The 730-Day Done Right Promise covers our workmanship for two full years – if something isn’t right, we make it right. Product manufacturer warranties vary by paver. Our technicians have up to 12 years of experience, and every job includes background-checked, uniformed staff.
Get a Free Paver Driveway Estimate in Fountain Valley
We’ll measure your driveway, walk you through the base and drainage options, and hand you a written line-item estimate before any work starts. Upfront pricing, no change-order surprises. Call (888) 300-3178 – a live person answers around the clock, no voicemail – and we’ll schedule a free on-site visit for your paver driveways in Fountain Valley. Thinking about the wider Fountain Valley property scope? We’ll walk that too, including Cabinets & Countertops in Fountain Valley if a kitchen project is also on the list.
Written by the team at Groundwork Construction Co.












