







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Fullerton, CA: What It Costs and How Long It Takes
A chain link fence in Fullerton typically runs $3,500 to $9,000 for a standard residential lot, installed in two to four working days once materials land. Most of that price is footage, height, and gate count, not labor tricks. Call (888) 300-3178 and we’ll walk your property, measure the run, and hand you a written line-item estimate before anyone swings a shovel. Estimates are free, and the number you see is the number you pay.

How Our Chain Link Fence Installation Runs, Stage by Stage

Chain link looks simple from the street. The difference between a fence that stays tight for twenty years and one that sags by year three is all in the prep nobody sees. Here’s the real sequence.
Stage 1: Site visit and layout (day 1, about 60-90 minutes)
We walk the property line with you and confirm exactly where the fence goes. In Fullerton this matters more than usual because lots in the older blocks were platted tight, and property lines on 1920s-40s parcels near downtown sometimes disagree with the county records by a foot or more. You decide the height, the gate positions, and whether we tie into an existing fence or run new. We mark the line with paint and flag every utility location request before a single post hole gets dug.
Stage 2: Utility locating and permit pull (days 1-5, runs in the background)
We file the 811 dig-alert request and, where your project needs one, pull the fence permit from the city. Fullerton reviews residential fence permits fairly quickly, but you should plan on a few business days either way. If your lot sits inside an HOA, this is the window where you’ll need the architectural approval in hand – we’ll give you the fence spec sheet and a dimensioned drawing to submit. Nothing gets dug until both clear.
Stage 3: Demo and post setting (day 2-3)
Old fence comes out first, and hauling is included in the written estimate, not billed as a surprise add-on. Posts go in next, set in concrete at the depth the soil calls for. This is where a Fullerton job can slow down: the shallow slab edges and older fill we hit around the 92833 ranch tracts mean some posts need deeper footings than a flat-lot job would. You’ll see us auger, set, and brace, and the concrete needs a day or two to cure before we hang anything on it.
Stage 4: Rails, mesh, tension, and gates (day 3-4)
Top rail, tension wire, and fabric go up, then the gates. Gate hardware is the part worth spending on. A cheap latch on a driveway gate gets slammed a thousand times, and you’ll feel the difference within a year. We hang gates so they swing clean and latch without a lift.
Stage 5: Walkthrough and cleanup (final day, 30 minutes)
We walk the whole run with you, check tension by hand at every post, test every gate, and magnet-sweep the work area for metal scraps. Your final payment happens after you’ve signed off on the walkthrough, not before. If something’s off, it gets fixed under our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
There’s no single “chain link fence.” The spec decisions drive both the price and how long the fence holds up in Fullerton’s dry summer heat and Santa Ana wind gusts.
- Gauge of the mesh. Residential chain link usually comes in 11.5-gauge or 9-gauge wire. The heavier 9-gauge costs more per foot but resists denting from balls, branches, and dogs far better. On a rental-rehab lot near Cal State Fullerton, we usually recommend the heavier gauge simply because it survives turnover.
- Post and rail weight. Standard-weight pipe is fine for most backyard runs. For a taller fence or a driveway gate, heavier schedule pipe is the honest call – a sagging gate on thin pipe is the number one callback we see on cheap installs.
- Height. Four-foot is the common residential backyard choice. Five and six-foot runs cost more in both material and wind load, and some Fullerton HOAs cap visible fence height at the front yard, so check before choosing.
- Coating and color. Galvanized is the budget choice and will weather to a dull gray. Vinyl-coated chain link (black or green) adds cost but reads far less “industrial,” which matters if your fence is visible from the street in the Valencia Park area or near the Muckenthaler blocks.
- Top rail vs. tension wire. A tension-wire top saves money and looks cleaner on a short run. A full top rail keeps the fabric from rolling down over time, which is what we usually recommend on anything over a hundred feet.
- Gates. Count them early. Each gate is its own fabrication and hardware set, and a double-drive gate can add meaningfully to the total.
What a Chain Link Fence Costs in Fullerton, CA
For a typical residential lot in Fullerton, budget $3,500 to $9,000 for a complete chain link fence installation including demo of the old fence and haul-away. Here’s what pushes a job toward the low or high end of that range:

- Linear footage. The biggest single driver. A small backyard run sits near the bottom; a full perimeter around a larger 92835 lot lands near the top.
- Height and gauge. Moving from 4-foot 11.5-gauge to 6-foot 9-gauge is a real materials jump, not a rounding error.
- Existing conditions. Concrete footings from an old fence, roots, slopes, or a fence buried in overgrowth all add labor. Clean removal of an old wood fence is easier than cutting out rusted chain link set in concrete.
- Gate count and type. Every gate is fabricated and hung separately. A pedestrian gate is inexpensive; a wide double driveway gate is not.
- Permit and HOA scope. Most residential fence permits are a modest line item, but if your lot needs a survey to confirm the property line or sits under historic review near downtown, that adds cost and time.
A written estimate from us is line-itemed: footage, gauge, post spec, gate count, demo, haul-away, permit, and the finish. What’s typically not included is landscaping repair beyond the fence line itself and any concrete flatwork you decide to add later. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Fullerton’s Housing Stock Does to a Chain Link Job
Fullerton is two very different construction markets on one map, and a fence job feels it. The older blocks near the downtown historic core hold 1910s-40s Craftsman and Spanish Colonial bungalows on tight lots with original property lines and, often, an older preservation-conscious review that catches front-yard fence changes. The 1950s-70s stucco ranch tracts across 92833, 92831, and 92835 sit on shallow slabs with fill that can surprise you at post depth. We cover all of Fullerton, from the 92836 blocks near downtown to the Cal State Fullerton-adjacent rental properties where landlords want a fence that survives turnover. If your chain link is one piece of a bigger yard rebuild, it’s often part of a full Fence Installation in Fullerton scope, and landlords rehabbing near the campus frequently pair a new fence with ADU Site Prep & Utilities in Fullerton or a garage conversion. We also see wind damage from Santa Ana gusts cracking stucco and loosening posts on unprotected runs, so we set posts to the soil, not to a flat-lot default. For the full range of what we build, see our Fence Installation service.
Serving Fullerton, CA – Our Local Coverage Area
We serve Fullerton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Fullerton

Most residential chain link fence jobs in Fullerton take two to four working days on site, plus a few business days for the utility locate and permit. Concrete curing on the posts adds a day or two before we hang fabric and gates. Call (888) 300-3178 for a schedule based on your actual footage.
It depends on height and location. Many residential backyard fences at standard height go in without a separate permit, while taller fences and front-yard runs may need one. We confirm the requirement during the site visit and pull the permit if it’s needed – no guessing on your part.
Not if the utilities are located first, which is why we file the 811 dig-alert request before any post hole is dug. Older Fullerton lots sometimes have irrigation runs that were never mapped, so we hand-probe along the line as well. If we do hit a line, it’s on us, not you.
A complete residential chain link fence in Fullerton runs $3,500 to $9,000, driven mostly by footage, height, gauge, and gate count. Our estimate is written, line-itemed, and fixed – the price doesn’t move once work starts. Call (888) 300-3178 for an exact quote.
Every fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years after the job. Post setting, tension, and gate hardware are all on us during that window.
Get a Free Chain Link Fence Estimate in Fullerton
Call (888) 300-3178 and a live person answers, any hour, any day. You’ll schedule a free on-site visit where we measure your run, walk the property line, and talk through gauge, height, and gates. You’ll get a written line-item estimate with the total spelled out, no change-order surprises. Plan on a couple of days to a week on the calendar depending on permits. The phone call is the only step you take; we handle the rest.
Written by the team at Groundwork Construction Co.












