







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Paver Driveways in Stanton Cost and How Long They Take
Paver driveways in Stanton run $7,000 – $18,000 for a standard two-car apron, and most jobs finish in four to six working days once the base is signed off. The work means tearing out the old slab or asphalt, rebuilding a compacted aggregate base, setting edge restraint, and laying the pavers on a screeded sand bed. Call (888) 300-3178 and we’ll walk your driveway, measure it, and put a written number in your hands before anything gets ordered.
How the Job Actually Runs, Day by Day

We lay out paver driveways the same way on every Stanton lot because the sequence is what keeps the finished surface flat and locked in. Here’s what you’ll see.
Day 1: Mark-out and demolition
We mark the footprint with paint and string line, confirm the slope away from the garage, and saw-cut the existing surface along the property line and apron. A typical 400 – 500 sq ft Stanton driveway comes out in a single day with a skid-steer and a dumpster on site. You’ll need your cars off the driveway and the street clear for the bin.
Days 1 – 2: Excavation and base
We dig down 8 – 10 inches for a driveway that takes passenger vehicles, more if you park a heavy truck. That depth matters on Stanton’s older lots where the original pour was thin. Then we bring in Class II base rock in lifts and compact each one. Nothing gets laid on soft or uncompacted ground.
Day 2: Inspection and grading
The base gets checked for compaction and drainage before any sand goes down. This is the stage where a homeowner makes one real decision: where water should run. On a tight Stanton lot, that’s usually a question of which corner gets the slight fall and whether a channel drain at the garage apron is worth adding.
Days 3 – 5: Setting the pavers
Edge restraint gets pinned first. Sand is screeded to grade, then pavers go down in your chosen pattern. A 500 sq ft driveway runs two to three days for a two-person crew. You’ll pick the pattern and color before this step, not during it.
Days 5 – 6: Compaction, cuts, and joint sand
We make all the perimeter and drain cuts, run a plate compactor over the field twice, then sweep polymeric joint sand into the gaps and activate it. Final walkthrough with you on the last day. Your written estimate lists each of these stages with its own line, so you can see exactly what you’re paying for.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Paver driveways aren’t one product. These are the real forks in the road, with what each one does to price and service life.
- Concrete pavers (interlocking): The workhorse for Stanton driveways. Interlock and edge restraint handle the ground movement small lots see. Budget $7,000 – $13,000 for 400 – 500 sq ft. Color and texture ranges are wide; a paver that mimics aged brick or stone is the popular pick here.
- Clay brick pavers: Genuine fired brick, deep color, decades of life. Costs more, $11,000 – $18,000 for the same footprint, and takes more cuts and more skill. It suits homeowners who want a traditional or Spanish-revival look against stucco.
- Permeable pavers with open joints: Water passes through into a gravel reservoir below. Worth the extra for a sloped lot or a driveway with no good discharge point, but the base excavation runs deeper and adds roughly 10 – 15% to the job. Orange County stormwater rules favor this where runoff would otherwise run onto a neighbor’s lot.
- Pattern and border: A running bond or herringbone field with a contrasting border costs more in cuts and labor but is what separates a sharp driveway from a flat one. Herringbone holds interlock best on a drive where cars turn in.
- Joint sand: Polymeric sand resists washout and weeds better than plain sand and is standard on our paver driveways. It’s a small line item and a big difference in how the surface holds up.
We work with Belgard pavers among others. We won’t quote you a paver grade we can’t stand behind in writing.
What Paver Driveways Cost in Stanton, CA

A standard paver driveway in Stanton lands in the $7,000 – $18,000 range. That number is for the whole job, base and all. It is not a per-paver rate and it is not a number that grows once we start. Five factors move a job to the low end or the high end:
| Factor | Low end | High end |
|---|---|---|
| Footprint (single-car apron vs. long two-car drive) | ~300 sq ft | 700+ sq ft |
| Existing surface | Asphalt, thin easy removal | Thick concrete, rebar, extra demo |
| Base depth and subgrade | Firm, dry, shallow dig | Soft fill, deep dig, road base import |
| Paver grade | Standard concrete pavers | Clay brick or permeable system |
| Drainage and grade | Simple fall to street | Channel drains, deep soil movement, grading work |
What’s included in our written estimate: demolition, hauling, base rock, compaction, edge restraint, pavers, cuts, polymeric sand, cleanup. What typically isn’t on the low end of that range: structural repair under the driveway, drainage hardware, or a permit where one turns out to be required. You’ll see every excluded item printed on the estimate. The number you see is the number you pay, and projects over $10,000 get $1,000 off. If you’re widening the approach or tying the pavers into a bigger yard project, that scope lives on our Driveway & Pavers in Stanton page.
See the difference
Before
After
Before
After
Before
AfterWhat Stanton’s Older Lots Do to a Paver Driveway Job
Stanton is a 3.8-square-mile city that’s essentially built out, so nearly every paver driveway here is an infill job on a tight lot, not new construction. Most of the housing is 1950s and 1960s tract stock: single-story stucco over wood frame, small frontages, and a lot of the original detached or attached garages still standing. That build era changes how the work runs. Original driveway pours are often thin and sometimes cracked through to a soft subgrade, so excavation can expose fill that has to be removed and replaced before a base goes down. Mature street trees mean you’ll see root heave lifting slabs and pushing pavers out of line over time; on these drives we build a base that can absorb some of that movement instead of fighting it. Lot lines are tight enough that staging usually happens in the alley or across the front yard, and the dumpster has to sit where a truck can still get past. On the paperwork side, structural site work in Stanton goes through Orange County plan check on a small-city desk, so I’d rather we confirm permit needs before we tear anything out than find out mid-dig. And because this is a semi-arid climate with near-zero freeze risk, we don’t design for frost heave. We design for sun, dry Santa Ana wind, and the drainage that keeps water off the garage sill. We cover the whole Stanton service area.
Serving Stanton, CA – Our Local Coverage Area
We serve Stanton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Paver Driveways in Stanton
Most paver driveways in Stanton take four to six working days from demolition to final compaction, with the base work and inspection eating two of those days. Larger footprints, clay brick, or permeable systems run longer. Call (888) 300-3178 for a schedule on your specific drive.
Most simple paver replacements on an existing footprint don’t require a permit, but any change to the curb approach, drainage, or grade can trigger one. We confirm what applies to your address before work starts and pull what’s needed. Call (888) 300-3178 and we’ll sort it out on the estimate walk.

Yes. A paver driveway is a surface and base job. Water lines, gas lines, and the garage slab stay put unless the excavation uncovers something damaged. If it does, we stop, show you, and price the fix before proceeding. Call (888) 300-3178 to talk through your lot.
Paver driveways in Stanton run $7,000 – $18,000, driven mostly by footprint size, existing surface, base depth, paver grade, and drainage. Every estimate is written line by line, so you see where the money goes. Call (888) 300-3178 for a free on-site estimate.
Our paver driveways carry the 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years on workmanship. That’s one of the longest workmanship guarantees in residential construction. Call (888) 300-3178 with questions about coverage.
Get a Free Paver Driveway Estimate in Stanton
If you’re pricing paver driveways in Stanton, the next step is a free on-site estimate. We’ll measure the footprint, check the existing surface and drainage, and hand you a written line-item quote the same visit. No-pressure, no change orders after the fact. Homeowners often pair the driveway with Door Installation in Stanton or a garage-side refresh, and we handle those too. Call (888) 300-3178 and a live person picks up, any hour.
Written by the team at Groundwork Construction Co.












