







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Fullerton, CA: What It Takes and What It Costs
Door installation in Fullerton usually runs $450 to $1,900 per opening for a standard interior or exterior door, with entry systems and custom sizes climbing to $4,500 and beyond. Most single-door jobs are measured, prepped and hung in one to two days; a full interior swap across a house takes three to five. Call (888) 300-3178 for a free on-site estimate with a written line-item price before anything gets ordered. We pull the permits where Fullerton requires them and walk the job with you at the end.

How we run a door installation from first measurement to final swing

Doors fail for boring reasons: a rough opening that was never square, a threshold set on a slab that moved, hinges sized to the wrong load. Our sequence is built to catch those before the door goes in, not after it’s painted.
Stage 1: Measure and assess (day 1, about 60 to 90 minutes)
We measure the rough opening in three places, check plumb and level on the jamb, and probe the sill for rot or water intrusion. On Fullerton’s older housing stock, that sill check matters more than the trim. You decide the door style here, and whether you’re keeping the existing frame or going with a prehung unit, which changes everything downstream.
Stage 2: Order and lead time (1 to 4 weeks, depending on the door)
Stock interior slabs come fast. An exterior entry door with sidelights and a specific finish can run three to four weeks. You’ll approve the hardware, the threshold material, and the finish before we release the order. This is the stage where a homeowner’s indecision costs the most time, so we lock the details in writing early.
Stage 3: Demo and prep (day 3 of the job, roughly 1 to 2 hours per door)
The old door and trim come out. We inspect the framing, shim and sister anything soft, and flash the exterior opening if it’s an exterior door. On a stucco wall, that flashing detail is where a door install either lasts or leaks. You see the opening before it’s closed, and we walk you through anything we find.
Stage 4: Set, shim and hang (2 to 3 hours per door)
Prehung units get set plumb, shimmed at the hinge side, and checked for a consistent gap around all four sides. We adjust strike plates and deadbolts so the hardware lines up without force. You’ll open and close the door yourself before we move to finish work.
Stage 5: Trim, seal, and final walkthrough (half a day)
Casing, thresholds and weatherstripping go on. Exterior doors get sealed and caulked against wind-driven rain and dust. We walk every opening with you, hand over the hardware keys, and leave you the written workmanship guarantee.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The door options you’ll actually choose between
Most of our Fullerton door installation conversations come down to four decisions. Here’s the honest trade-off on each.
- Interior hollow-core vs. solid-core: Hollow slabs are cheap and light, maybe $80 to $150 each, but they transmit sound and dent easily. Solid-core doors run $250 to $600 and feel like a real door. In a rental near Cal State Fullerton, hollow-core makes sense. In your own home, solid-core.
- Exterior steel vs. fiberglass vs. wood: Steel is the budget pick and holds paint well, but it dents and can rust at the bottom edge. Fiberglass resists the dry heat and Santa Ana dust better and won’t warp. Wood looks the best on a Craftsman front entry and needs the most upkeep. Expect $600 to $2,500 for the unit alone depending on grade.
- Prehung vs. slab replacement: Prehung includes the frame and is faster and more reliable to install. A slab swap reuses the existing jamb and saves money but only works if the old frame is square and sound.
- Hardware and finish: This is where budgets quietly move. A basic knob set is $40; a quality entry set with a deadbolt and matching handleset is $200 to $500. On a coastal-adjacent door, choose stainless or coated hardware so it doesn’t pit in a couple of seasons.
If you’re upgrading entry doors as part of a full exterior refresh, homeowners often pair this with Windows & Doors in Fullerton so the trim profiles match.
What door installation costs in Fullerton, CA
Interior door installation in Fullerton runs $450 to $900 per door, installed with trim and hardware. Exterior entry doors land between $900 and $1,900 for a standard unit, and go to $4,500 and up for a custom entry with sidelights or a wide double door. Here’s how the line items break down.
- Standard interior slab or prehung, installed: $450 – $900
- Solid-core interior door with upgraded hardware: $700 – $1,300
- Exterior fiberglass or steel entry, installed: $900 – $1,900
- Custom or oversized entry with sidelights: $2,500 – $4,500+
- Sliding or French door unit (labor and set): $1,200 – $3,000
- Reframing or sill repair if rot is found: $300 – $1,200
What pushes a job to the high end: an exterior door on a stucco wall that needs flashing and trim rebuild, a rough opening that’s out of square, a door that requires a permit because it’s part of an addition or a structural change, and premium hardware. What keeps it low: a straight slab swap in an interior wall, stock sizes, and existing trim you’re keeping.

Our written estimate lists the door unit, hardware, trim, labor and disposal separately. No-hassle upfront pricing means the number on the page is the number you pay, and we back the workmanship with our 730-Day Done Right Promise. Anything outside the quote, like hidden rot, gets a change order you approve before we touch it.
Call (888) 300-3178 to schedule your free estimate; a live person answers around the clock.
See the difference
Before
After
Before
After
Before
AfterWhat Fullerton homes specifically do to a door installation
Fullerton sits between its historic oil-town core and the mid-century ranch sprawl around Cal State Fullerton, which means door work here is rarely one kind of job. On the 1910s to 1940s Craftsman and Spanish Colonial bungalows near downtown and Valencia Park, you’re dealing with balloon-frame walls, plaster interiors and original single-pane sidelights, so a door swap can turn into trim restoration to match the original profile. On the 1950s to 1970s stucco-over-wood ranch homes across 92833 and 92831, the shallow slabs and settled footings mean doors stick and swing off-kilter long before the door itself is worn out. We see the same pattern on blocks near the Muckenthaler: a door that “needs replacing” is really a hinge-side jamb that dropped a quarter inch. The dry Santa Ana wind events push dust and grit against exterior thresholds, which wears weatherstripping faster than inland-inland climates. If your door project is really part of a larger scope, our Windows & Doors team handles the rest of the envelope.
Serving Fullerton, CA – Our Local Coverage Area
We serve Fullerton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Door Installation in Fullerton

A single interior door is typically a one-day job, and an exterior entry door takes one to two days once the unit is on site. A whole-house interior swap runs three to five days. The bigger variable is lead time on the door itself.
Like-for-like door replacement usually doesn’t require a permit, but any door that’s part of a new opening, an addition, or a change to the structural wall does. We confirm the permit scope with the city before we start and pull it where required. Call (888) 300-3178 and we’ll tell you exactly what your job needs.
In most cases, yes. A standard door replacement reuses the existing rough opening and doesn’t touch plumbing or framing. The exceptions are widening an opening, adding a new doorway, or fixing a jamb that’s dropped or rotted, which we flag during measurement.
Interior doors run $450 to $900 installed, and exterior entry doors run $900 to $1,900 for a standard unit. Custom and oversized entries climb to $4,500 or more. Call (888) 300-3178 for an exact written quote, and estimates are free.
Our door installation is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If something’s not right, we make it right. The door unit itself carries the manufacturer’s warranty, and we hand over the paperwork at the walkthrough.
If your door work is part of a bigger renovation, homeowners often pair this with Garage Conversion ADU in Fullerton or a kitchen refresh through Cabinets & Countertops in Fullerton. We cover the whole Fullerton area, from 92835 to 92831.
Get a free door installation estimate in Fullerton
Call (888) 300-3178 for a free on-site estimate on your door installation in Fullerton. A live person answers any hour, day or night. We’ll measure, walk the openings with you, and hand over a written line-item price with the door, hardware, trim and labor broken out separately. No voicemail, no waiting until Monday. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.












