







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Fullerton: What the Job Actually Involves
A paver driveway in Fullerton generally runs $7,000 to $18,000, and most jobs are finished in three to six working days once we start. You’re looking at demolition of the old surface, excavation to depth, a compacted base rated for vehicle loads, a bedding layer, then the pavers themselves set, cut, and compacted into place. Sand goes in the joints and the edges get restrained so nothing walks. Call (888) 300-3178 and we’ll walk the driveway with you and put a real number in writing – free estimate, no pressure.

How We Build a Paver Driveway, Stage by Stage

Paver driveways live or die on the base, not the surface. We treat the top layer as the finish and everything under it as the actual job. Here’s how the week runs.
Stage 1: Walkthrough, measurement, and layout (day one, half a day)
We measure the drive, check slope and drainage direction, and confirm where water needs to leave the property. This is where you decide the paver pattern, the border, and whether the apron meets the street flush or with a curb reveal. We also confirm access for the delivery pallets and where the material gets staged, which matters on tight lots.
Stage 2: Demolition and haul-off (day one to day two)
Old concrete, asphalt, or worn pavers come out and go to the dumpster. On a typical two-car Fullerton drive that’s a solid day of breaking and hauling. If there’s root intrusion from a parkway tree, we cut and treat it here rather than building over it.
Stage 3: Excavation and base prep (day two to day three)
We dig down to the depth the base requires – usually six to nine inches of compacted aggregate depending on soil and traffic. Fullerton’s shallow slabs and older lots sometimes turn up surprises here: old footings, abandoned lines, or soft spots that need over-excavation. Each lift gets watered and plate-compacted in two-to-three-inch passes. A base laid too thin in one pour is the single most common reason a driveway sinks.
Stage 4: Edge restraint, bedding, and paver setting (day three to day five)
Edge restraint goes down first so the field can’t spread. Then a screeded bedding layer, and the pavers go in from a corner, working in your chosen pattern. Cuts at the edges and around any curve happen on a wet saw. You’ll walk the layout before we compact, so if a border or a soldier course isn’t reading right, we adjust it then.
Stage 5: Compaction, joint sand, and cleanup (final day)
We compact the finished field, sweep polymeric or regular joint sand in, compact again, and mist it down. Final walkthrough with you, then a clean sweep of the street and sidewalk. The drive is typically drivable once the sand sets.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between
Most of the decision-making happens in stage one, so come to the walkthrough with a rough sense of what you want. Here’s the honest trade-off on each:
- Concrete pavers (interlocking): The workhorse. $8 – $14 per square foot installed, holds color well, resists the Santa Ana heat, and any cracked unit can be swapped without touching the rest. Best all-around pick for Fullerton drives.
- Clay brick pavers: The premium look, at roughly $12 – $20 per square foot. Beautiful on Craftsman and Spanish Colonial homes near downtown, and it ages well, but it’s heavier, pricier, and slower to lay.
- Tumbled or antiqued finish vs. straight-edge: The tumbled look hides scuffs and oil drips better; the crisp modern edge reads cleaner but shows every stain.
- Permeable pavers: Worth considering if you have drainage issues or a lot of runoff toward the garage. Costs a bit more, handles water far better.
- Base and joint sand: Polymeric joint sand costs more than plain sand but resists washout and weeds, which matters when Santa Ana gusts blow grit across the drive.
- Border and pattern: A contrasting border and a herringbone or running-bond field change the look and add labor. Quikrete and Sakrete both make the base and joint products; we spec what the site actually needs, not what’s on sale.
What Paver Driveways Cost in Fullerton, CA
For a standard two-car drive, expect $7,000 to $18,000 installed. Here’s what pushes a job toward either end of that range:

- Square footage: The biggest lever. A single-car drive lands near the bottom; a wide three-car drive with a turnaround sits near the top.
- Existing surface: Removing and hauling old concrete or asphalt adds cost that a bare-soil lot skips.
- Site access: Tight driveways, slopes, or gates that block delivery access slow the crew and add labor.
- Base depth and soil: Shallow slabs and soft spots across 92833 mean more excavation and over-excavation.
- Paver grade and pattern: Clay brick and complex patterns cost more than standard concrete pavers in a running bond.
Every written estimate is line-item: excavation, base, pavers, restraint, joint sand, haul-off, and any root work. What’s typically outside the number is driveway sealing (a separate job), major drainage regrading, and any utility relocation if a line runs under the drive.
See the difference
Before
After
Before
After
Before
AfterWhat Fullerton Homes Specifically Do to This Job
Fullerton is really two driveway markets. In 92832 and 92836, the 1910s – 1940s bungalows and Craftsman homes near the downtown core and around Valencia Park and the Muckenthaler-area blocks come with narrow original aprons and preservation-conscious review that rules out a plain gray slab – clay brick or a period-correct paver reads right here. Out in 92833 and 92835, the 1950s – 70s stucco-clad ranches around Cal State Fullerton sit on shallow slabs that often have settled, so base prep and edge restraint have to account for small grade changes and drainage that runs toward the garage. The dry summer heat and Santa Ana wind events mean joint sand needs a polymeric option that won’t blow out; frost is a non-issue. Permits here depend on scope and HOA rules, so we confirm the requirement before we lift a shovel. This is one piece of the broader work we handle across Fullerton.
Serving Fullerton, CA – Our Local Coverage Area
We serve Fullerton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Fullerton

Most paver driveways in Fullerton take three to six working days once we start, with the base and compaction eating the most time. A simple two-car drive can finish in three; a large drive with a lot of excavation runs longer. Call (888) 300-3178 for a timeline on your specific driveway.
It depends on scope. A like-for-like surface replacement often doesn’t require one, while regrading, drainage changes, or public right-of-way work near the apron can trigger review. We confirm the requirement for your address before work begins. Call (888) 300-3178 and we’ll talk through your situation.
Rarely, and not when the base under it has failed. Laying pavers over a cracked or settled slab just transfers the problem upward, so we usually demo and rebuild the base properly. If you’re pairing the driveway with other work, homeowners often combine this with Door Installation in Fullerton.
Expect $7,000 to $18,000 installed for a typical two-car driveway, driven by size, existing surface, base depth, and paver grade. Every estimate is line-item and written, so the number you see is the number you pay. Call (888) 300-3178 for an exact quote – estimates are free.
Every paver driveway we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship, and our technicians have up to 12 years of experience laying pavers. Call (888) 300-3178 to schedule your estimate and see the warranty in writing.
If the driveway is part of a bigger exterior refresh, this is one piece of a full Driveway & Pavers in Fullerton scope, and it pairs naturally with our Driveway & Pavers work. Some homeowners also combine it with Cabinets & Countertops in Fullerton when the project turns inward.
Get Your Paver Driveway Estimate
Call (888) 300-3178 to schedule a free on-site estimate for paver driveways in Fullerton. We walk the drive with you, measure, check slope and drainage, and hand you a line-item written quote – upfront pricing, no surprises. Live person answers 24/7. A $1,000 credit applies to projects over $10,000, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.












