







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Irvine, CA: What It Takes and What It Costs
Door installation in Irvine, CA typically runs $650 to $3,400 per door installed, and most single-door jobs are finished in one day. Entry doors, interior slabs, patio and French doors, and garage service doors all fall under that range, with the number driven mainly by door type, frame condition, and whether your village’s architectural review board has to sign off first. Call (888) 300-3178 and we’ll talk through your door and your community’s rules before anyone swings a hammer.

Here’s the part most homeowners don’t expect: in Irvine, the paperwork can take longer than the install.
How our door installation process actually runs, stage by stage

Every job follows the same five stages. What changes is how much of it happens before we touch your doorframe.
Stage 1: Assessment and measurements (day 1, 60 to 90 minutes)
We measure the rough opening, check the frame for rot, settling, or water intrusion, and photograph the existing door for your records. This is where you tell us whether you’re replacing like-for-like or changing the door’s style, swing, or size. If your home is in a village with an architectural committee, we confirm what’s already on file before we spec anything.
Stage 2: Spec selection and HOA submittal (days 2 to 10, sometimes longer)
You pick the door, finish, hardware, and glazing. Then, if your community requires it, we prepare the submittal package: product cut sheets, color samples, elevation drawings, and a short description of the change. This is the stage that separates an Irvine door job from the same job in Santa Ana. Review timelines vary by village, so we build that window into the schedule rather than pretending it doesn’t exist.
Stage 3: Permit and order (1 to 3 weeks)
Most like-for-like door swaps need no city permit. Structural changes do: widening a rough opening, adding a header, or converting a window to a door. When a permit is required, we pull it and schedule inspection. Door lead times run 1 to 3 weeks for stock sizes and 4 to 8 weeks for custom or oversized units.
Stage 4: Removal and install (1 day for most doors)
We protect the floor, pull the old door and frame, repair any rot, and set the new unit plumb and square. Insulation and flashing go in before trim. For an entry door we typically budget 5 to 8 hours; interior slabs run 2 to 4 hours each.
Stage 5: Finish, hardware, and walkthrough (same day or the next)
Hardware, weatherstripping, threshold, and paint or stain touch-up. We test the swing, the latch, and the seal, then walk you through the operation before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The door options you’ll choose between, and the trade-offs
Door selection in Irvine often comes down to what your village already allows, so know your community standards before you fall in love with a style.

- Fiberglass entry doors: $1,200 to $3,400 installed. Holds up in Irvine’s dry heat and occasional Santa Ana wind events far better than wood, and won’t warp or swell. Best all-around pick for a stucco-and-tile Mediterranean home. Slightly less “real” feel than wood.
- Steel entry doors: $800 to $2,200. Strong, secure, inexpensive. Dents and can rust at the threshold if the bottom edge isn’t kept painted.
- Solid wood entry doors: $1,800 to $3,800. Premium look, good for Spanish-style elevations. Needs refinishing every few years in our sun and low humidity.
- Interior slab doors: $650 to $1,400 installed. Hollow-core MDF is light and cheap; solid-core quiets a room noticeably and is worth the small upcharge next to a bedroom or bathroom.
- French and glazed patio doors: $1,900 to $3,400. More light into a Great Park or Woodbury great room. More glass means more heat gain – low-E glazing is worth it here.
- Garage service doors: $700 to $2,000. Insulated panels help if the garage shares a wall with living space.
What door installation costs in Irvine, CA

A single door replacement in Irvine lands between $650 and $3,400 installed in most cases. A whole-house interior door swap (6 to 8 doors) runs $4,000 to $9,000. Entry doors with sidelights and transoms push toward the top. What moves the number:
- Door type and grade: a stock interior slab sits at the bottom; a custom fiberglass entry door with sidelights sits at the top.
- Frame condition: rot repair, reframing, or rebuilding a damaged rough opening adds $250 to $900.
- Structural changes: widening an opening or adding a header needs engineering and a permit, and adds $1,000 to $3,500.
- Hardware and finish: basic knob and deadbolt versus a keyed handle set with smart lock, plus paint or stain.
- HOA and design review: if submittals are required, budget a few hundred dollars for drawings and coordination.
A written estimate from us lists the door, hardware, labor, disposal, and any permit or submittal fees line by line. What it doesn’t include: surprises. If we find rot under the threshold, you get a documented change with a price before we proceed. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Irvine homes specifically do to a door installation job
Irvine is a master-planned city, built almost entirely from the 1970s onward under Irvine Company design control. Nearly every door replacement here happens inside a village with an architectural committee and a set of approved styles and colors. In Woodbridge and Deerfield, the 1970s tracts, we see original metal or wood door frames with weatherstripping that’s long gone and thresholds that have taken forty years of sun. Northwood and Westpark homes from the 1990s and 2000s usually have stucco openings that are still true, so a like-for-like swap goes quickly. The Spectrum and Great Park townhomes are different: attached-wall construction and party issues mean interior door swaps need care with common walls, and HOA review often runs tight. Around ZIP codes 92604 and 92602, we routinely run submittals for entry door color changes that a Santa Ana contractor would never have to think about. Our technicians have up to 12 years of experience navigating exactly these reviews.
Serving Irvine, CA – Our Local Coverage Area
We serve Irvine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Door Installation in Irvine

Most single-door installs are finished in one day, usually 5 to 8 hours for an entry door and 2 to 4 hours for an interior slab. Scheduling may stretch if your village requires architectural review before work can start. Call (888) 300-3178 for a timeline specific to your community.
A like-for-like door replacement generally does not require a city permit, but structural changes do, including widening an opening or adding a header. Your HOA may require an architectural submittal regardless. We pull permits and handle submittals so you have one point of accountability.
Yes. Most door replacements keep the existing rough opening and don’t touch plumbing, electrical, or framing. If your new door is wider, taller, or changes the swing, we tell you upfront whether structure work is involved and price it before the job starts.
Most single doors run $650 to $3,400 installed; a full interior door package runs $4,000 to $9,000. Custom entry doors and structural changes push toward the high end. Call (888) 300-3178 for an exact quote; estimates are free.
Every install is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. If your door replacement is part of a larger exterior refresh, our Windows & Doors in Irvine page covers the wider scope, and many homeowners pair a new entry door with Cabinets & Countertops in Irvine while the house is already torn up. Some of our Irvine clients taking on a bigger project at the same time also ask about a Garage Conversion ADU in Irvine.
Get a free door installation estimate in Irvine
Call (888) 300-3178 for a free on-site estimate for Door Installation in Irvine. A real person answers, day or night. We’ll measure the opening, walk through your community’s review requirements, and hand you a written line-item quote so you know exactly what the job costs before you commit. Our Windows & Doors service covers the full range, and we work throughout Irvine and the surrounding villages. $1,000 off projects over $10,000, 0% financing for 18 months, and a free design consult are available on qualifying work.
Written by the team at Groundwork Construction Co.












